Used standard 3 Core Radiator
USED 3 core radiator (new one shown) for a classic Mini upto 1991 models. Clean inside and no leaks. Used parts are sold as-is and are not returnable.
Wiper Motor plastic cover - Used
USED-Wiper motor plastic cover for Classic Minis. Used parts are sold as-is
Heater Control Valve MGA & MGB
New Heater Valve for the MGA and MGB, replace your old one before it puts water in your car instead of heat. For the gasket see part# 12H3868
Bypass hose - Kevlar GZA2086
This is the shorter by-pass hose which slides up the longer 12A2075 adaptor in the cylinder head and then back down on the water pump outlet allowing fitment without removing the cylinder head 42.5 mm long. made out of kevlar for extra longevity. See GZA2083 for alternative longer version
Fluted bypass hose with clamps
Fluted easy fit Bypass Hose that goes from the water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. 12A1093
Bypass hose with clamps -not 1275
Bypass Hose that goes from the water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. Not for 1275's
Bypass hose with clamps -1275
Bypass Hose that goes from the water pump to the cylinder head on many "A" series engines. A common point of failure. Always keep a spare. 1 hose and 2 clamps included. Longer hose for 1275cc engines.
Thermostat Blanking Sleeve 11G176
The Thermostat may be removed to help reduce engine temperature but a thermostat blanking sleeve should always be fitted in its place to maintain correct coolant circulation through the entire cylinder head otherwise overheating may occur around #3 and 4 combustion chambers and cause severe problems. When using a blanking sleeve it is also necessary to blank off the by-pass hose (not found on later pumps/heads) between the head and water pump. Part # 11G176
11G227 Top Radiator Bracket Rubber Grommet
Rubber grommet for the upper radiator bracket. Part #11G227. Qty 1.
Lower Radiator Hose Genuine Rover 12A1551EVA
Lower radiator hose for Mini and Moke without heater take off. 12A1551EVA or GRH802
12A312 Fan Spacer
12A312 radiator fan spacer. 1/16" Used with most of the stock radiator fans, definitely required if you have a breather type timing cover. Mini, Sprite, Minor
12A312 Fan Spacer -Used
USED-12A312 radiator fan spacer. 1/16" Used with most of the stock radiator fans, definitely required if you have a breather type timing cover. Mini, Sprite, Minor. Used parts are sold as-is
Thermostat Housing 12G103
Thermostat housing, most Classic Minis except larger bore type. Part # 12G103. Dont forget to order the gasket!
Standard Radiator Cooling Fan 12G2129
Cooling Fan as fitted to most Classic Minis. Part 12G2129. For extra cooling power in hotter climates see "Tropical Fan". ***New fans are either yellow or white plastic***
Tropical Cooling Fan 2A998
Genuine Rover/Heritage Tropical Cooling Fan as fitted to Minis in hot climates. Perfect for the summer. Part # 2A998
Lower Radiator Hose GRH240 Silicone
Blue Silicone lower radiator hose with heater take off. Classic Minis with heater take off. Bottom hose GRH240S.
Top Hose GRH245
Upper Radiator hose for MK2+ Minis. This is shorter than the Mk1 hose but fits all current radiators where the radiator outlet is positioned 1-1.5" in from the front edge
Top Hose GRH245 Blue Silicone
Upper Radiator hose for MK2+ Minis. This is shorter than the Mk1 hose but fits all current radiators where the radiator outlet is positioned 1-1.5" in from the front edge. This is made longer hose can also but cut to fit most upper hose applications.
Top Hose GRH247
Upper Radiator hose for Cooper S and 1275GT models. See GRH469 for slightly longer version.
Top Hose GRH247 Kevlar
Kevlar upper Radiator hose for Cooper S and 1275GT models.