Sale

Blank Engine ID Plate

$ 4.89 -15% $ 5.62 | Stock Qty = 5

Blank engine serial number plate for "A" series engines. This is positioned just below the #1 spark plug and should be riveted in place. Professional stamping is also available for this item at an extra cost, email sales@gbcarparts.com for details. Sorry stamping is no longer available.

Sale

CP350 Weslake patents label plate

$ 7.39 -15% $ 8.50 | Stock Qty = 1

Weslake patents metal rocker cover plate where they were protecting their head chamber design such as the 12G295 998cc cylinder (AEG163 cooperS)head but they appeared on earlier models such as the 997cc cooper and of course S versions

Sold Out !!!

LH Lower Gearbox/Engine Stabilizer -Clearance

$ 20.00 -15% $ 23.00 | Stock Qty = Out of Stock !!!

CLEARANCE-Left side lower engine stabilizer. Qty 1. Designed as an almost mandatory addition to any Mini with a rod change transmission, extra stabilizers will greatly aid any car. In stock form the control is left to the upper stabilizer. This often results in not only significant movement but even a cracking and breaking of the bracket that is welded to the bulkhead. This kit fits to the lower clutch casing/flywheel case studs and then goes rearward to bolt on the rear leg of the subframe, where one hole will be required. The bushes used are the stock bushes as used in the stock upper stabilizer Kits are made for both the right or left side of the tranny; either or both can be used. This one is on clearance as it is not complete, it needs the bolts for mounting. It also has "shelf wear"

Sold Out !!!

Valve Cover Hex Bolts

$ 22.95 -15% $ 26.39 | Stock Qty = Out of Stock !!!

SRacer Anodised Billet Aluminum Hexagonal Valve Cover bolt set. Gunmetal gray. One pair.

Sold Out !!!

Valve Cover Knurled Bolts

$ 22.95 -15% $ 26.39 | Stock Qty = Out of Stock !!!

SRacer Anodised Billet Aluminum Knurled Valve Cover bolt set for "A" series engines. Gunmetal gray. One pair.

Sold Out !!!

8mm Black Silicon Ignition Wires Set

$ 25.95 -15% $ 29.84 | Stock Qty = Out of Stock !!!

8mm Black Silicone High performance spark plug wires for "A" & "A+" Minis. Not for MPI models or side entry distributor caps.

Sold Out !!!

Mini Ignition Wires Set- Red Silicon

$ 27.95 -15% $ 32.14 | Stock Qty = Out of Stock !!!

7mm HYPERFIRE High Performance Red Silicone Ignition wires for "A" & "A+" Minis.

Sold Out !!!

Mini Cylinder Head Stud ea.

$ 6.00 -15% $ 6.90 | Stock Qty = Out of Stock !!!

Stud for manifold, Price (1) ea.

Sale

RetroSport Steady Bar - Silver Adjustable

$ 86.65 -15% $ 99.65 | Stock Qty = 2

Silver anodized finish adjustable engine steady bar (dogbone) in billet aluminum fits all standard transmission . A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings at one end and a rose joint at the other. ENG3269-S. Special order item, allow 14 to 21 days for delivery.

Sale

RetroSport Steady Bar - Silver- Long

$ 56.05 -15% $ 64.46 | Stock Qty = 3

Silver finish long engine steady bar in billet aluminum fits all Minis from 1990 onwards (HIF carb cars plus injection. Also earlier automatics). A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings the same as the stock part. ENG3268-S. Special order item, allow 14 to 21 days for delivery.

Sale

RetroSport Steady Bar - Blue- Long

$ 56.05 -15% $ 64.46 | Stock Qty = 2

Blue anodized finish long engine steady bar in billet aluminum fits all Minis from 1990 onwards (HIF carb cars plus injection. Also earlier automatics). A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings the same as the stock part. ENG3268-BU

Sale

RetroSport Steady Bar - Red- Long

$ 56.05 -15% $ 64.46 | Stock Qty = 1

Red anodized finish long engine steady bar in billet aluminum fits all Minis from 1990 onwards (HIF carb cars plus injection. Also earlier automatics). A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings the same as the stock part. ENG3268-RD .

Sold Out !!!

RetroSport Steady Bar - Silver Std

$ 56.05 -15% $ 64.46 | Stock Qty = Out of Stock !!!

Silver finish standard engine steady bar in billet aluminum fits all standard transmission Minis to 1990 and also 998 engines to 1992. A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings the same as the stock part. ENG3267-S

Sale

RetroSport Steady Bar - Red Std

$ 56.05 -15% $ 64.46 | Stock Qty = 1

Red anodized finish standard engine steady bar in billet aluminum fits all standard transmission Minis to 1990 and also 998 engines to 1992. A great lightweight and sturdy replacement for the rusty factory steady bar that goes from the rear of the cylinder head to the bulkhead. This product uses standard or poly steady bar bushings the same as the stock part. ENG3267-RD

Sale

Bushforrodchangebox

$ 16.35 -15% $ 18.80 | Stock Qty = 2

Bushing for the rod change gearbox were the gearbox linkage attach to the gearbox case so the rods won't have paly. 

 

Sale

ADU5738 Axle Shaft Seal

$ 5.25 -15% $ 6.04 | Stock Qty = 63

Differential to axle shaft oil seal fits all except "S" models and Automatics with Hardy Spicer Joints. A very common cause of persistent oil leaks on Mini and fairly easy and inexpensive to fix. ADU5738

Sale

AHU1082 "S" Axle Seal

$ 4.95 -15% $ 5.69 | Stock Qty = 4

Differential to axle shaft seal for "S" and Automatic models with Hardy Spicer joints. AHU1082

Sale

C-STR630 Poly Bushing Set

$ 16.48 -15% $ 18.95 | Stock Qty = 14

C-STR630 upgraded Poly bushing set for engine steady stabilizer bars  This is the old style. REPLACED by the new style. picture is not show for new style.

The new kit has 2 metal bushings and 2 poly bushings. One kit is for one side ONLY. You will need 2 kits for a complete engine stabilizer. 

Sold Out !!!

KKF100390 Stabilizer Bushing - Genuine

$ 5.99 -15% $ 6.89 | Stock Qty = Out of Stock !!!

Engine Stabilizer bar bushing. KKF100390This bush is a genuine version of CRC5329 and sold individually

Sold Out !!!

KKF100390 Stabilizer Bushing - Genuine

$ 8.85 -15% $ 10.18 | Stock Qty = Out of Stock !!!

Engine Stabilizer bar bushing. KKF101320EVO This bush is a one piece for the engine stabilizer used on 1996 onwards.