Used Item- Cooling Fan, the same fan fitted to Minis in hot climates. It could use a clean and repaint. Used fans may be silver or yellow. Original Part # 2A998-used parts are sold as is and are not returnable.
Used Heater Blank Plate. Billet aluminum with bolts included. Used parts are sold as-is.
14A6498 Radiator Cowl. The left side inner fender of the MKI/2/3 pre 1975 Mini should have a metal cowling to focus the air from the radiator to the wheel well. The almost sqaure cowling is spot welded to the inner fender and has the tabs on it that in turn hold the rubber surround that fits around the radiator. If you are restoring your car properly you will need to have this in your Mini. See also the surround rubber 14A7286
New Heater Valve Gasket for the MGA and MGB. For the valve see part# BHA5298
Jaguar XKE Series 1 & 2 heater water control valve. New high quality reproduction fits all XKE Series 1 & 2 (3.8 & 4.2) models. This is the part that turns the water off and on to the heater. Equivalent to Jaguar part# C17820
MPI Mini thermostat housing - RetroSport billet alloy - Available in Silver, Red, Blue or Black. SPECIAL ORDER ITEM. DELIVERY IS 14-30 DAYS APPROX.
Grommet for the heater hoses where they go through the firewall. Part # 34G3651, qty 1
Gasket between the cylinder head and heater control valve, blank plate or outlet. Part # 88G221
Heater Control Valve on the cylinder head. the most common cause of too little or too much heat. Part # ADU9102. See 88G221 for gasket.
Straight Kevlar Bypass Hose that goes from the water pump to the cylinder head on 1275 Cooper S engines. This one is slightly longer and has a slightly thicker wall than GZA2083. Part # AEG484. For non Cooper S 1275, see part # GZA2083
Classic Mini 2 core polished aluminum light weight high efficiency Classic Mini radiator with drain plug. Reinforced side mounts for extra strength. Can be used on all Minis prior to 1989 (or up to MPI if you don't need the electric fan switch), Mk1 cars will require shroud modifications if they still have the original shroud. Radiator cap also included. Also available with the fan switch for 91+ carb and SPI models. Dimensions 2+5/8" thick, 14+1/4" high (add 1" for the neck), 11+3/8 wide. Hose connectors are 1" diameter. THIS ONE HAS A MINOR COSMETIC IMPERFECTION IN THE CENTER ROW, See Pic. Discounted and sold as-is.
Screw in fan switch with washer as fitted in the bottom of Super Cool 2 core and alloy radiators. C-ARA4445
New heater matrix / heater core for 1984-1991 Minis. 2 plastic 5/8" outlets at the same end and close together which exit the heater on the r/h side. The later HIF38 1275 and single point cars had a change point where the plastic outlets exited on the l/h. These units take 5/8" heater hose, therefore on cars pre 1989 where the pipe work is still 1/2" you will need to fit 5/8" hose pipe with a reducer MOC210 and then 1/2" hose as required.
Black rubber grommet for the lower radiator bracket. Part #CAM4618. Also available in longer lasting yellow poly material see CAM4618POLY Qty 1.
Yellow polyurethane grommet for the lower radiator bracket. Part #CAM4618POLY. Also available in standard black rubber, see CAM4618. Qty 1.
Kenlowe Electric Cooling Fan Kit. Made specifically for the Classic Mini. Includes the electric fan and all parts needed to install. Thermostatically controlled so only comes on when needed for extra cooling. Can be used to replace the mechanical fan thus saving valuable HP or just as an auxilliary fan in hot climates. Installation instructions included. C-ARA4400. Delivery 10-15 days
Classic Mini 2 Core Supercool Radiator. This radiator is great for hot climates and will keep your engine running cooler. It is especially suited for larger & more powerful engines but is not suggested for off road use. Add a "Tropical Fan" for extra cooling performance. Mk1/2 two piece fan shrouds may require slight modification. Part # C-ARA4442
Rubber seal for the fan switch as fitted in the bottom of OE radiators on 91+ Mini side mount radiators. Part # CDU2334. See GVS198 if you need the switch as well.
Black Silicone Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or the daily driver that wants to forget about hose problems. Being made in silicon they are far more flexible than ordinary rubber and much easier to fit!
Blue Silicone Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or the daily driver that wants to forget about hose problems. Being made in silicon they are far more flexible than ordinary rubber and much easier to fit!